Features: Fire Alarm Detection Systems
- Long term service and support
- Two way IR communications with Generation 6 Detectors reduces commissioning and service costs.
- Deep housing with capacity for up to 38AH batteries (MZX251 / MZX252 / MZX254 only)
- 2 KM loop length
- 32 way zonal LED display (MZX250 / MZX251 / MZX252 only)
- 240 Zones capability - No zonal display (MZX254 only)
- High level User Interface with “Front Panel Controls” to reduce lifetime cost of ownership
- Wide range of multi-sensor detectors including the 3oTec triple sensing detectors. Early detection without false alarms.
- Wide range of ancillaries including door control to BS7273 category A
- Matching fully functional mains and 24vdc powered repeaters available
- DDA compliance using the advanced 3000 series AV Base and loop powered sounder beacons.
- Approved to EN54 the system is designed to be installed to BS5839
Technical Specifications
Minerva MZX252 Control Panel & Repeater
Mechanical
Dimensions (mm): H W D
Panel 480 x 410 x 205mm
Repeater 480 x 410 x 140mm
Approx Weight:
Panel 10.6Kg
Repeater 9.3Kg
Colour
Housings: RAL 7035
Control Facia: Pantone Grey 431C
Environmental
Operating Temperature: -8OC to +55OC Storage Temperature: -20OC to +70OC
Relative Humidity: 90% RH continuous (non-condensing)
EMC/RFI:
EN50130-4, EN50081-1
Electrical
Supply Voltage:
230VAC 50/60 Hz
Input Current (panel)
1.6A
The Minerva® MZX252 is a highly featured digital addressable panel with a comprehensive
but easy to operate user interface. The system provides two loops, each with 250 addresses making
it suitable for medium size premises.
The MXDigital protocol is robust enough to operate over most cable types making it an ideal choice for upgrades where existing cables can be reused to dramatically cut costs. The built in power supply will charge the internal batteries and support a full compliment of loop powered sounders and beacons in accordance with the requirements of BS5839. The Minerva® MZX252 is a fire detection controller at the heart of a comprehensive fire detection system that can be used to protect both life and property.
A matching 32 zone fully functional repeater is available, A maximum of 7 repeaters can be driven from the control panels 2 wire remote bus, the repeater houses its own mains psu and batteries.
Download The Minerva® MZX252 data sheet from Fire Alarm Manufactures
Features: Fire Alarm Detection Systems
- Long term service and support
- Two way IR communications with Generation 6 Detectors reduces commissioning and service costs.
- Deep housing with capacity for up to 38AH batteries (MZX251 / MZX252 / MZX254 only)
- 2 KM loop length
- 32 way zonal LED display (MZX250 / MZX251 / MZX252 only)
- 240 Zones capability - No zonal display (MZX254 only)
- High level User Interface with “Front Panel Controls” to reduce lifetime cost of ownership
- Wide range of multi-sensor detectors including the 3oTec triple sensing detectors. Early detection without false alarms.
- Wide range of ancillaries including door control to BS7273 category A
- Matching fully functional mains and 24vdc powered repeaters available
- DDA compliance using the advanced 3000 series AV Base and loop powered sounder beacons.
- Approved to EN54 the system is designed to be installed to BS5839
Technical Specifications
Minerva MZX252 Control Panel & Repeater
Mechanical
Dimensions (mm): H W D
Panel 480 x 410 x 205mm
Repeater 480 x 410 x 140mm
Approx Weight:
Panel 10.6Kg
Repeater 9.3Kg
Colour
Housings: RAL 7035
Control Facia: Pantone Grey 431C
Environmental
Operating Temperature: -8OC to +55OC Storage Temperature: -20OC to +70OC
Relative Humidity: 90% RH continuous (non-condensing)
EMC/RFI:
EN50130-4, EN50081-1
Electrical
Supply Voltage:
230VAC 50/60 Hz
Input Current (panel)
1.6A
Minerva MZX252 Control Panel & Repeater
Mechanical
Dimensions (mm): H W D
Panel 480 x 410 x 205mm
Repeater 480 x 410 x 140mm
Approx Weight:
Panel 10.6Kg
Repeater 9.3Kg
Colour
Housings: RAL 7035
Control Facia: Pantone Grey 431C
Environmental
Operating Temperature: -8OC to +55OC Storage Temperature: -20OC to +70OC
Relative Humidity: 90% RH continuous (non-condensing)
EMC/RFI:
EN50130-4, EN50081-1
Electrical
Supply Voltage:
230VAC 50/60 Hz
Input Current (panel)
1.6A
The Minerva® MZX252 is a highly featured digital addressable panel with a comprehensive
but easy to operate user interface. The system provides two loops, each with 250 addresses making
it suitable for medium size premises.
A matching 32 zone fully functional repeater is available, A maximum of 7 repeaters can be driven from the control panels 2 wire remote bus, the repeater houses its own mains psu and batteries.
Download The Minerva® MZX252 data sheet from Fire Alarm Manufactures
No comments:
Post a Comment